Spaceloft® Line
Building and Construction applications
External perimeter walls insulation (Internal plasterboard counterwalls)
The external perimeter walls insulation is performed by internal plasterboard counterwalls fixed on metal frames. The combination with thermal insulating aerogel materials such as Spaceloft, applied in one or several layers as needed, allows a considerable reduction in terms of occupied space by the "insulation package". Just consider that a 30 mm thick Spaceloft, with thermal resistance equal to 2,14 m²K/W, has the same thermal insulation performance provided by a 85-90 mm thick mineral or wood fibre. Now it's finally and indisputably possible to obtain an energy requalification preserving, at the same time, the initial interior roominess too. This leads the real estate to increase in value especially thanks to the slightest reduction in the net floor area. Spaceloft 10 mm can be fixed to walls by gluing points and/or mechanically by the use of plastic wall plugs with o-rings. In choosing the installation method must be always taken into account the material that constitutes the wall and its current condition.
External perimeter walls insulation (Cavity walls)
The redevelopment with an internal brick counterwall is certainly one of the best solutions to be adopted under the heat-capacity profile.
The use of Spaceloft, even in this case, permits to optimize the space and favours the choice, during the design phase, of the most suitable bricks.
External perimeter walls insulation (Dry coating)
The exterior insulation made with Spaceloft meets the basic requirements of a correct thermal insulation intervention: areal mass on the warm side, breathability and thermal bridges "correction", with extremely low thicknesses.
Please consult the technical catalogue to discover and learn all the applications